pmtw-series ? p30wg-xxxxe/z/d 4:1lf ? single, dual and triple output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 1/4 p30wg-xxxxe/z/d4:1lf all specifications typical at ta=25c, nominal inpu t voltage and full load unless otherwise specified input specifications voltage range 4:1 ultra wide input (see table) input filter pi type input reflected ripple current1 20 ma pk-pk start up time (nom. vin and constant resistive load) 30ms, typ. output specifications voltage accuracy 1% (main out) 5% (aux - for triple output) voltage adjustability (only single output) 10%, max. short circuit protection indefinite (hiccup, automatic recovery) over load protection 150% of fl, typ. line regulation 0.5% (single&dual) 1% / 5% (triple main / aux) load regulation (0% - 100%) / triple (10% - 100%) 0.5% (single) 1% / 5% (dual & triple main / aux) cross regulation3 5% (dual & triple) ripple&noise (20mhz bandwidth / 1.0uf ? pk-pk) 100 mv (single&dual) 50 / 75mv (triple: main / aux) temperature coefficient 0.02% / c transient recovery time 4 250us, typ. transient response deviation 4 3%, max. general specifications i/o isolation voltage (3 sec.) 1600 vdc i/o isolation capacitance 1500 pf, typ. i/o isolation resistance 1000 m ohm, min. switching frequency 330 khz, typ. humidity 95% rel h reliability calculated mtbf (mil-hdbk-217f) >435 khrs (single&dual out) >320 khrs (triple out) physical specifications case material nickel coated copper potting / base material epoxy / plastic (ul94v-0 rated) weight ~ 31g, typ. environment specifications operating temperature -40 to +50c (for 100% - ambient) maximum case temperature 105c storage temperature -40 to +125c cooling free air convection (10mm distance required) rohs conform soldering 260c, max. (1.5mm from case 10s.) mainzer stra?e 151?153 d-55299 nackenheim tel. +49 6135 7026-0 fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de the pmt w series p30wg - xxxxe/z /d 4:1lf is a family of cost effective 30w, single, dual and triple output dc-dc converter s with an ultra wide input range of 4:1. these converters are encapsulated in nickel coated brass 2x1 case with high performance features: 1600vdc input/output isolation voltage, continuous short circuit protect ion with automatic restart and tight line / load regulation, over current prot ection, over voltage protection, over temperature protection, high effic iency operation and soft start. pmtw-series 30 watt 4:1 ultra wide input 2? x 1? metal case 1.6 kv dc i/o isolation regulated output single, dual and triple output continuous short circuit prot. rev.11-2009
pmtw-series ? p30wg-xxxxe/z/d 4:1lf ? single, dual and triple output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 2/4 selection guide single, dual and triple output order # i n p u t v o l t a g e ( v d c ) i n p u t c u r r e n t n o l o a d ( m a ) i n p u t c u r r e n t f u l l l o a d ( m a ) o u t p u t v o l t a g e ( v d c ) o u t p u t a u x i l i a r y ( v d c ) o u t p u t c u r r e n t m i n . l o a d ( m a ) o u t p u t c u r r e n t f u l l l o a d ( m a ) e f f i c i e n c y ( % ) c a p a c i t o r l o a d ( u f ) 2 single output p30wg-243r3e4:1lf 9-36 60 1185 3.3 - 0 7500 89 20000 p30wg-2405e4:1lf 9-36 100 1420 5 - 0 6000 91 14000 p30wg-245r1e4:1lf 9-36 90 1448 5.1 - 0 6000 91 14000 p30wg-2412e4:1lf 9-36 30 1436 12 - 0 2500 90 2000 p30wg-2415e4:1lf 9-36 30 1420 15 - 0 2000 91 2000 p30wg-483r3e4:1lf 18-72 50 593 3.3 - 0 7500 89 20000 p30wg-4805e4:1lf 18-72 60 702 5 - 0 6000 91 14000 p30wg-485r1e4:1lf 18-72 60 724 5.1 - 0 6000 91 14000 p30wg-4812e4:1lf 18-72 30 718 12 - 0 2500 90 2000 p30wg-4815e4:1lf 18-72 30 710 15 - 0 2000 90 2000 dual output p30wg-2405z4:1lf 9-36 120 1437 5 - 0 3000 90 3000 p30wg-2412z4:1lf 9-36 30 1453 12 - 0 1250 89 1300 p30wg-2415z4:1lf 9-36 40 1437 15 - 0 1000 89 1300 p30wg-4805z4:1lf 18-72 70 710 5 - 0 3000 91 3000 p30wg-4812z4:1lf 18-72 30 718 12 - 0 1250 90 1300 p30wg-4815z4:1lf 18-72 40 718 15 - 0 1000 90 1300 triple output p30wg-243r312d4:1lf 9-36 80 1287 3.3 12 500 / 42 5000 / 4 20 89 15000 / 220 p30wg-243r315d4:1lf 9-36 90 1279 3.3 15 500 / 33 5000 / 3 30 89 15000 / 220 p30wg-240512d4:1lf 9-36 100 1440 5 12 400 / 42 4000 / 42 0 89 8000 / 220 p30wg-240515d4:1lf 9-36 110 1431 5 15 400 / 33 4000 / 33 0 90 8000 / 220 p30wg-483r312d4:1lf 18-72 50 636 3.3 12 500 / 42 5000 / 4 20 89 15000 / 220 p30wg-483r315d4:1lf 18-72 50 640 3.3 15 500 / 33 5000 / 3 30 89 15000 / 220 p30wg-480512d4:1lf 18-72 60 712 5 12 400 / 42 4000 / 420 91 8000 / 220 p30wg-480515d4:1lf 18-72 60 707 5 15 400 / 33 4000 / 330 90 8000 / 220 if you need other specifications, please enquire. notes:
pmtw-series ? p30wg-xxxxe/z/d 4:1lf ? single, dual and triple output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 3/4 package / pinning / derating 10.16 (0.40) 5.08 (0.20) min. bottom view 4 6 5 10.16 (0.40) 1 2 5.08 (0.20) 5.08 (0.20) 45.72 (1.80) 10.16 (0.40) 10.16 (0.40) 2.54 (0.10) 2.54 (0.10) dia. 1.00 (0.04) all dimensions are typical in millimeters (inches). - pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - pin pitch tolerance: +/-0.35 (+/-0.014) - case tolerance +/-0.5 (+/-0.02) specification may change without notice. 2" x 1" C metal case 3 only and output models 2.54 (0.10) bottom view 4 7 5 7.62 (0.30) 1 2 10.16 (0.40) 5.08 (0.20) 45.72 (1.80) 5.08 (0.20) 7.62 (0.30) 2.54 (0.10) 2.54 (0.10) 3 only output models 2.54 (0.10) 5.08 (0.20) 6 7.62 (0.30) 2.54 (0.10) # single dual triple 1 +vin +vin +vin 2 - vin - vin - vin 3 ctrl ctrl ctrl 4 +vout +vout +aux 5 - vout com - aux 6 trim - vout com 7 +vout pin connections notes:
pmtw-series ? p30wg-xxxxe/z/d 4:1lf ? single, dual and triple output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 4/4 app notes 1 = measured input reflected ripple current with a simu lated source inductance of 12uh. 2 = tested by minimal vin and constant resistive load. 3 = dual: one load is 25% to 100% load, the other l oad is 100% load, the output voltage variable rate is within 5%. triple: main output 100% load, auxiliary 100% , other auxiliary 25% to 100%. auxiliary outputs ( + aux and - aux ) : main output 100% load, auxiliary 100%, other auxiliary 2 5% to 100% or main output 25%, auxiliary 25%, other aux iliary 25% to100%. 4 = tested by nominal vin and 25% load step change (75% - 50% - 25% of io) 5 = the pmtw series can meet en55022 class a with a n external filter in parallel with the input pins. 6 = an external filter capacitor is required if the module has to meet en61000-4-4 and en61000-4-5 7 = the remote on/off control pin is referenced to ?vin (pin2). emi filter: input filter components (c1, c3, l) are used to hel p meet conducted emissions requirement. these components should be mounted as close as possible t o the module; all leads should be minimized to decrease radiated noise. emc specifications radiated emissions en 55022 class a conducted emissions 5 en 55022 class a esd en 61000-4-2 perf. criteria a rs en 61000-4-3 perf. criteria a eft 6 en 61000-4-4 perf. criteria a surge 6 en 61000-4-5 perf. criteria a cs en 61000-4-6 perf. criteria a pfmf en 61000-4-8 perf. criteria a over voltage protection (zender diode clamp) 3.3 vout: 3.9 v 5 vout 6.2 v 5.1 vout 6.2 v 12 vout 15 v 15 vout 18 v 5 vout 6.2 v 12 vout 15 v 15 vout 18 v under input voltage lockout (typ.) 24 vin models module on/off 8.6v / 7.9v 48 vin models module on/off 17.8v / 16v remote on/off control 7 on: 3 -12 vdc or open circuit off: 0 ? 1.2 vdc or short circuit pin2 and pin3 off idle current: 5ma, typ. 6 5 6 4 rtrim-up rtrim-down external output trimming output can be externally trimmed. (single output models only!) c1: 100uf, 100v l: 12uh c3: 1206, 470pf, 2kv c1: 100uf, 100v l: 12uh c3: 1206, 470pf, 2kv single&dual models triple models
|
